User Guide for Yealink VC110 Video Conferencing Endpoint8Infrared SensorThe infrared sensor is located within the Yealink logo. Aim the remote control at thecamera IR sensor to operate the unit.NoteThe right side of the VC110 all-in-one unitPort Name Description① USBInserts a USB flash drive to one of the two USB ports forstoring screenshots and recording videos.Inserts a dongle to one of the two USB ports for connectingthe VCM60 video conferencing wireless microphone.Note: The wireless microphone dongle and USB flash drivecan work at the same time. If two USB flash drives are connected, only the latterone can be identified.When the endpoint is powered on, avoid physically turning the camera. This may causepermanent damage to the camera. Always use the remote control to pan and tilt it.
