Yealink VC110 User Manual
Also see for VC110: Getting startedRecovery guideQuick start guideAdministrator's guideUser guide
                                                                                                                                                               | |
Contents
|
User Guide for Yealink VC110 Video Conferencing Endpoint28Do the following:1. Locate the DVI port on the back of the VC110 all-in-one unit, and connect it to theDVI port of the cable hub with the supplied DVI cable.2. Locate the Display1 port of the VC110 all-in-one unit, and connect it to the HDMI porton the display device with the supplied HDMI cable (Make sure the display deviceis powered on).3. Locate the Internet port on the cable hub, and connect it to the port on the in-linepower switch/hub with the supplied 2m Ethernet cable.4. (Optional.) Locate the Audio In port of the cable hub, do one of the following:- Connect it to the Audio Out port on the video conferencing phone with the 7.5mEthernet cable that labeled Audio In, and then connect the free end of theexpansion microphone cables to MIC ports on the video conferencing phone.- Connect it to the Audio Out port of the VCM30 video conferencing microphonearray with the 7.5m Ethernet cable labeled Audio In.5. (Optional.) Locate the PC port of the PC port of cable hub and connect it to theVGA output port on the PC with the supplied VGA cable for sharing content. |
Related manuals for Yealink VC110
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine