Customizing the VC800 Video Conferencing System89Audio input device is configurable via web user interface at the path Setting->Video &Audio->Audio Input.Far Control Near CameraLocal video is displayed on the display device of the far site during a call. For the best view, youcan enable the Far Control Near Camera feature to allow the far site to control the focus andangle of the local camera.You can configure the Far Control Near Camera feature via the remote control or web userinterface.To configure far control near camera feature via the remote control:1. Select (More menu).2. Press or to scroll to Setting and then press to expand the menu.3. Press or to scroll to Video & Audio and then press to enter submenu.4. Press or to scroll to Far Control Near Camera and then press to enable ordisable this feature.5. Press to return to the idle screen.Far-end Camera Control is configurable via web user interface at the path Setting->Video &Audio->Far Control Near Camera.Controlling the Remote CameraIf the remote camera enables the Far Control Near Camera feature and corresponding cameracontrol protocol is enabled (For more information, refer to your system administrator), you cancontrol the remote camera during a video call via the remote control.