User Guide for the VC800 Video Conferencing System22Connecting the VC800 Codec1. Connect the LAN port on the VC800 codec to a switch/hub device port with the supplied3m Ethernet cable.2. Locate the HDMI port on the VC800 codec, and connect it to the HDMI port on the displaydevice with the supplied HDMI cable (Make sure the display device is powered on).3. Locate the VC Hub/Phone port on the VC800 codec, and connect it to the Codec port onthe VCH50 video conferencing hub using 7.5m Ethernet cable.4. Do one of the following to share contents:- Locate the HDMI port on the VCH50 video conferencing hub, and connect it to theHDMI port on the PC with the supplied HDMI cable. So that you can share contentsduring a call.- Locate the MINI DP port on the VCH50 video conferencing hub, and connect it to theMINI DP port on the PC with the supplied MINI DP cable. So that you can sharecontents during a call.5. Locate the Audio port on the VCH50 video conferencing hub, and connect it to theInternet port on the CP960 conference phone.