Yealink W52P User Manual
Also see for Telkom W52P: Auto provisioning guideGetting startedRecovery guideDeployment guideQuick installation guide
                                                                                    | |
Contents
| 
User Guide for the W52P IP DECT Phone42. Connect the supplied Ethernet cable between the Internet port on the base stationand the Internet port in your network or the switch/hub device port.Power over EthernetUsing a regular Ethernet cable, the base station can be powered from a PoE-compliant(IEEE 802.3af) switch or hub.To connect the PoE:1. Connect the Ethernet cable between the Internet port on the base station and anavailable port on the in-line power switch/hub.NoteTo insert batteries into the handset:1. Open the battery cover.2. Insert the batteries in the correct polarity.If in-line power is provided, you don‟t need to connect the AC adapter. Make sureswitch/hub are PoE compliant.Important! Do not unplug or remove the power and network to the base station while it isupdating firmware and configurations. |
Related manuals for Yealink Telkom W52P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine