Yealink W52P User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P User Manual Manual pdf 28 page image

User Guide for the W52P IP DECT Phone16indicates the handset is registered successfully.After successful registration, an internal handset number and handset name appear onthe LCD screen.You can also register a handset via web user interface at the pathStatus->Handset&VoIP.To de-register a handset:1. Press to enter the main menu.2. Select ->Registration->De-reg. Handset.3. Enter the system PIN (default: 0000).4. Press the Done soft key.The LCD screen displays the names of the handsets registered to the same basestation. The name of the handset itself is highlighted and followed by a left arrow.5. Press or to highlight the desired handset name, and then press the OKsoft key.The LCD screen prompts “De-register Handset”.6. Press the Yes soft key to de-register the handset or the No soft key to cancel.To select the base station:1. Press to enter the main menu.2. Select ->Registration->Select Base.The LCD screen displays all base stations the handset registered to and theBestbase option (if the handset is registered to more than one base station). Theradio box of the currently used base station is marked. You can select Bestbase tosearch for the base station with the best signal strength.3. Press or to highlight the desired base station or the Bestbase option, andpress the Select soft key.The handset begins to search for base station. After successful connection, thehandset plays a warning tone and prompts “Base selected successfully!”.You can highlight the base station the handset registered to, and then press theRename soft key to rename the base station name.The base station attempts to contact a DHCP server in your network to obtain validnetwork settings (e.g., IP address, subnet mask, gateway address and DNS address) bydefault.If the base station cannot contact a DHCP server for any reason, you need to configurebasic network settings manually.