Yealink W52P User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P User Manual Manual pdf 56 page image

User Guide for the W52P IP DECT Phone44call by pressing the Accept soft key.To configure auto intercom:1. Press to enter the main menu.2. Select ->Telephony->Auto Intercom.The LCD screen displays three configuration types.3. Press or to highlight the desired configuration type, and press theChange soft key.The radio box of the selected configuration type is marked.You can reset individual settings that you have made on the handset. Resetting handsetwill not overwrite settings of directory, call history, voice mail and the handsetregistration to the base station. Other customized settings on the handset will be reset tofactory settings after handset reset. We recommend that you ask your systemadministrator for advice before resetting your handset.To reset the handset:1. Press to enter the main menu.2. Select ->System Settings->Handset Reset.The LCD screen prompts “Reset handset to default?”.3. Press the Yes soft key to reset the handset or the No soft key to cancel.You can reset the base station to factory settings. This will clear all individual settings ofthe base station (e.g., directory and account registrations). Handset registrations andthe system PIN will not be reset to factory defaults. We recommend that you ask yoursystem administrator for advice before resetting your base station.To reset the base station:1. Press to enter the main menu.2. Select ->System Settings->Base Reset.3. Enter the system PIN (default: 0000).4. Press the Done soft key.All individual settings of the base station are reset to factory defaults successfully.The power indicator LED on the base station slow flashes during the resettingprocess.Note Base station reset may take a few minutes. Do not power off until the base station startsup successfully.