York E*BA-F018 THRU 060 Technical Manual

Contents

036-21318-002 Rev. A (0106)FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALESPLIT-SYSTEMHEAT PUMPS10 SEERMODELS:E*BA-F018 THRU 060(1.5 THRU 5 NOMINAL TONS, 1 PH)E*BA-(T,W)036 THRU 090(3 THRU 7.5 NOMINAL TONS, 3 PH)MODELS: 018 - 060 (1 PH)MODELS: 036-048 (3 PH)MODELS: 060, 090 (3 PH)Due to continuous product improvement, specificationsare subject to change without notice.Visit us on the web at www.york.com for the mostup-to-date technical information.Additional rating information can be found atwww.ariprimenet.org.TECHNICALGUIDETECHNICALGUIDEUN ITARYH EATPUMPTEQUI PMENRSE CTIONSATIONER TIFICCO FDS TANDARIAR240MAN UFACTURERCERTIFIEDCLYOMPINGTOARI ASLISTEDThis product was manufacturedin a plant whose quality systemis certified/registered as beingin conformity with ISO 9001.Certification applies onlywhen the completesystem is listedwith ARI.DESCRIPTIONThe 10 SEER Series heat pumps is the outdoor part of a ver-satile system of heat pumps. It is designed to be custom-matched with one of UPG’s complete line of evaporator sec-tions, with each serving a specific function. Matching Air Han-dlers are available for upflow, downflow, or horizontalapplications to provide a complete system. Electric Heatersare available, if required. Add-On coils are available for usewith upflow, downflow, or horizontal furnaces and air han-dlers.WARRANTYSingle Phase Units:5-year limited parts warranty.5-year limited compressor warranty.Three Phase Units:1-year limited parts warranty.5-year limited compressor warranty.FEATURES• QUALITY COILS - The coil is constructed of copper tube andaluminum fins.• COIL PROTECTION - Coils are protected from damage by apolymer mesh applied between the coil face, and a PVCcoated steel coil guard.• PROTECTED COMPRESSOR - The compressor is internallyprotected against high pressure and temperature. This isaccomplished by the simultaneous operation of high pressurerelief valve and a temperature sensor which protects the com-pressor if undesirable operating conditions occur. A liquid linefilter-drier further protects the compressor.• DURABLE FINISH - Cabinet is made of pre-painted steel.The pre-treated flat galvanized steel provides a better paint tosteel bond, which resists corrosion and rust creep. Specialprimer formulas and matted-textured finish insure less fadingwhen exposed to sunlight.• LOWER INSTALLED COST - Installation time and costs arereduced by easy power and control wiring connections. Dis-charge line heat exchanger knockouts are provided, ifrequired. Available in sweat connect models only. The unitcontains enough refrigerant for matching indoor coils and 15feet of interconnecting piping. The small base dimensionmeans less space is required on the ground or roof.• TOP DISCHARGE - The warm air from the top mounted fan isblown up away from the structure and any landscaping. Thisallows compact location on multi-unit applications.• LOW OPERATING SOUND LEVEL - The upward air flow car-ries the normal operating noise away from the living area. Therigid top panel effectively isolates any motor sound. Isolatormounted compressor and the rippled fins of the condensercoil muffle the normal fan motor and compressor operatingsounds.• LOW MAINTENANCE - Long life permanently lubricatedmotor-bearings need no annual servicing.• EASY SERVICE ACCESS - Fully exposed refrigerant con-nections, a single panel covering the electrical controls, andthe molex plug in the control box connecting the condenserfan make for easy servicing of the unit.• SECURED SERVICE VALVES - Secured re-usable servicevalves are provided on both the liquid and vapor sweat con-nections for ease of evacuating and charging.• U.L. and C.U.L. listed - approved for outdoor application.Certified in accordance with the Unitary Small Equipment certifi-cation program, which is based on ARI Standard 210/240.