York PREDATOR 120 Installation Manual

Also see for PREDATOR 120: Technical guide

035-17311-002-A-0803Unitary Products Group 13NOTE: A one-inch clearance must be provided betweenany combustible material and the supply ductworkfor a distance of 3 feet from the unit.Do not permit overhanging structures or shrubs toobstruct condenser air discharge outlet, combustionair inlet or vent outlets.FIGURE 8 - UNIT DIMENSIONSorBaserailDimensionsSeeDetailA89275950-3/44-1/46-3/1617-3/1624-3/1630-3/16ConveniencePowerOutletEntryØ7/8PowerEntryØ2-1/230-11/32ControlEntryØ7/8PowerEntryØ2-1/2LETRONTorDrainDimensionsSeeDetailBTABLE 6: UNIT CLEARANCESTop **. Units must be installed outdoors. Overhanging struc-ture or shrubs should not obstruct condenser air dis-charge outlet.72” Right 12”Front 36” Left 36”Rear ††. To remove the slide-out drain pan, a rear clearance ofsixty inches is required. If space is unavailable, thedrain pan can be removed through the front by separat-ing the corner wall.36” Bottom ‡‡. Units may be installed on combustible floors made fromwood or class A, B or C roof covering materials.0”5-1/4BasePan17-13/16ViewofWallAcrossfromCoilGasPipeInletDETAIL A3-3/43-9/162-3/8DETAIL B5-3/8DETAIL C