290699-YIM-B-06076 Unitary Products GroupREFERENCEAdditional information is available in the following refer-ence forms:• Technical Guide - D(CE, CG) 036-072, 292458• Technical Guide - D(HE, HG) 036-060, 255038• General Installation - D(CE, CG) 036-072 andD(HE, HG) 036-060, 290699RENEWAL PARTSContact your local York ® parts distribution center forauthorized replacement parts.APPROVALSDesign listed by CSA as follows:• For use as a cooling unit only with or withoutoptional electric heat.• For use as a forced air furnace with coolingunit• For outdoor installation only.• For installation on combustible material.• For use with natural gas or propane gas.The installer should pay particular attention to thewords: NOTE, CAUTION and WARNING. Notes areintended to clarify or make the installation easier. Cau-tions are given to prevent equipment damage. Warn-ings are given to alert installer that personal injury and/or equipment damage may result if installation proce-dure is not handled properly.PRODUCT NOMENCLATUREThis product must be installed in strict compli-ance with the enclosed installation instructionsand any applicable local, state, and nationalcodes including, but not limited to, building,electrical, and mechanical codes.Improper installation may create a conditionwhere the operation of the product could causepersonal injury or property damage.D 5 C E APRODUCT GENERATION3 = 3rd Generation5 = 5th Generation6 = 6th GenerationPRODUCT CATEGORYD = Single Package Air Conditioner(Air Cooled)PRODUCT IDENTIFIERCE = CoolingVOLTAGE CODE25 = 208/230-3-6046 = 460-3-6058 = 575-3-60036 = 3 Ton048 = 4 Ton060 = 5 Ton072 = 6 Ton30 6 2 5NOMINAL COOLINGCAPACITYFACTORY INSTALLEDHEATA = Cooling Only