York TCHD18 Technical Manual

Also see for TCHD18 THRU 60: Technical guide

Contents

York TCHD18 Technical Manual Manual pdf 1 page image

TECHNICAL GUIDEHORIZONTAL DISCHARGEAIR CONDITIONERS13 SEER – R-410AMODELS:TCHD18 THRU 60(1.5 THRU 5 NOMINAL TONS, 1 PHASE)Due to continuous product improvement, specificationsare subject to change without notice.Visit us on the web at www.york.comAdditional rating information can be found atwww.ahridirectory.orgWARRANTYStandard 5-year limited parts warranty.Standard 10-year limited compressor warranty.Extended 10-year limited parts warranty when product isregistered online within 90 days of purchase for replace-ment or closing for new home construction.®556454-YTG-B-0410FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALEDESCRIPTIONThe 13 SEER Series condensing unit is the outdoor part of aversatile system of air conditioning. It is designed to be custom-matched with one of UPG’s complete line of evaporator sec-tions, with each serving a specific function. Matching Air Han-dlers are available for upflow, downflow, or horizontalapplications to provide a complete system. Electric Heaters areavailable, if required. Add-On coils are available for use withupflow, downflow, or horizontal furnaces and air handlers.FEATURES• Performance - Efficiency levels from 13.0 SEER/11.5 EERwith a loose coil and up to 15.5 SEER/13.5 EER when cou-pled with a variable speed indoor blower.• Easy to Install - Compact “slim-line” design allows for easyinstallation in tight spaces. Units can be stacked.• Lower Installation Cost - Installation time and costs arereduced by easy power and control wiring connections. Theunit contains enough refrigerant for matching indoor coilsand 15 feet of interconnecting piping.• Quiet Operation - Levels as low as 67 dBA. High efficiencyscroll compressor and swept wing fan design reducing oper-ating sound to a mere whisper.• State Of The Art Coil Technology - Micro-channel (MC2)aluminum coil technology provides enhanced capacities andefficiencies plus the benefit of maximum corrosion protectionespecially in coastal applications (up to 7 times greater cor-rosion resistance than conventional copper tube and alumi-num fin coils).• Compressor Protection - The compressor is internally pro-tected against high pressure and temperature. This isaccomplished by the simultaneous operation of high pres-sure relief valve and a temperature sensor which protects thecompressor if undesirable operating conditions occur. A liq-uid line filter-drier further protects the compressor.• Durable Cabinet - Heavy-gage steel cabinet and a tubularbase rail provide added support.• Durable Finish - Automotive quality finish provides the ulti-mate protection from harmful U.V. rays and rust creep ensur-ing long-lasting high quality appearance. A powder-painttopcoat is applied over a baked-on primer, using a galva-nized, zinc coated steel base material. The result is a finishthat has been proven in testing to provide 33% greater dura-bility than conventional powder-coat finishes.• Aesthetic - Powder paint “Champagne” Color provides anattractive retail finish.• Low Maintenance - Long life permanently lubricated motor-bearings need no annual servicing.• Easy Service Access - Fully exposed refrigerant connec-tions and a single panel covering the electrical controls makefor easy servicing of the unit.• Secured Service Valve - Secured re-usable service valvesare provided on both the liquid and vapor sweat connectionsfor ease of evacuating and charging.• Other Features:- Factory supplied filter drier- High pressure switch, low pressure switch- Accumulator and crankcase heater in all sizes- Up to 200’ line set out of the box- Zero lot line clearances (6” clearance in either direction)• Agency Listed - U.L. and C.U.L. listed - approved for out-door application. The unit is certified in accordance with theUnitary Small Equipment certification program, which isbased on ARI Standard 210/240.