York TP9C Series Installation Manual

Also see for CP9C Series: User's information manual User's information manual

Contents

York TP9C Series Installation Manual Manual pdf 45 page image

1083292-UIM-A-0114Johnson Controls Unitary Products 45SECTION XIII: START UP SHEET33" 97% - 98% AFUE Modulating Gas Furnace Start Up SheetProper furnace start up is critical to customer comfort and equipment longevityName AddressCity State or Province Zip or Postal CodeFurnace Model Furnace SerialEvaporator Coil Model Evaporator Coil SerialUpflow Downflow Horizontal Left Horizontal RightUnit is levelVenting system is the proper size, within the limitations of the chart in the installationinstructions, properly connected to the furnace, and properly pitchedCondensate drain is connectedFilter TypeIntake SizeExhaust Size# of 90 Degree Ells # 0f 45 Degree Ells LengthLength# 0f 45 Degree Ells# of 90 Degree EllsPolarity is correct (black is L1 (hot), white is N (neutral) Ground wire is connectedLine voltage value to furnace (volts AC)Low voltage value between "R" and "C" on furnace control board (volts AC)Thermostat Type Other System Equipment and AccessoriesOwner InformationEquipment DataFurnace ConfigurationCondensate ManagementVentingElectrical: Line VoltageOutdoor Unit Model Outdoor Unit SerialFilter, Thermostat, AccessoriesFilter Location(s)Connections -- All Per Installation Instructions and Local CodeGas piping is connected (including drip leg) Supply plenum and return air are connectedFilter SizeVent system is connectedThermostat wiring is completeThermostat heat anticipator set to .1 (if present)Electrical: Low VoltageTechnician Performing Start-Up Installing Contractor NameStart-Up DateCondensate tubing is correctly installed for the furnace positionContinued on next PageSidewallRoofSidewallRoofAtticExhaustTerminationIntakeTerminationThermostat cycle rate set to 6 cycles/hour (if present)

/ 46

Related manuals for York CP9C Series