ZDC ZN-7200-2EI-O User Manual

Contents

ZDC ZN-7200-2EI-O User Manual Manual pdf 10 page image

10Chapter 1 IntroductionIntroductionThe ZAC Access Point is a multi-mode 2x2 Access Point embedded with a software-based virtualaccess controller for centrally managing managed APs that eliminates the need for a separatehardware controller to manage the WLAN. ZN-7200-2EI-O operates at 2.4GHz band whileZN-7200-2AEI-O operates at 5GHz band. Ideally for SMB or hotspot network, this breakthroughinnovation provides superior Wi-Fi network solutions at significantly lower cost and easiermanagement.While operating as access point, the ZAC Access Point also provides centralized management andmonitoring of all the managed APs on the network. In addition, the easy-to-install ZAC Access Pointis also a high-performance last-mile broadband solution that provides reliable wireless networkcoverage for broadband application.Key FeaturesCentralized configuration control for your networkCompliant with IEEE 802.11n standardSupport passive PoE supplied with 24V.High reliable watertight housing endures almost any harsh environmentsThree management modes including AC, AC+Thin AP, Thin AP and Fat AP.Four wireless operation modes in FAT AP mode including AP, Wireless Client, WDS and APRepeater.Up to 8 BSSIDs available for service deploymentSupport encryption: 64/128/152-bit WEP and 802.1X, WPA, WPA2, WPA&WPA2,WPA-PSK,WPA2-PSK, and WPA-PSK&WPA2-PSKUser-friendly Web and SNMP-based management interface