13Typical Management ScenarioThis section describes the typical management of ZAC Access Point. By default, it is set to thin APmode (managed AP) which allows it to be managed by the ZAC Access Point in AC mode. Thefollowing figure illustrates a ZAC wireless network.When a thin AP mode joins a wired network, it will start to look for a ZAC Access Point in AC mode. Ifthe thin AP founds the AP controller on the network, it will send the registration request to the APcontroller. Once the registration is successfully made, the AP that acts as the AP controller will addthe thin AP to its management list and provides it configuration information.
