105SNMP ManagementThe IEEE 802.11n ZAC Access Point supports SNMP for convenient remote management. Open“SNMP Settings” in “Management” shown below. Set the SNMP parameters and obtain MIB filebefore remote management.Protocol Version: Select the SNMP version, and keep it identical on the IEEE 802.11n ZAC AccessPoint and the SNMP manager. The IEEE 802.11n ZAC Access Point supports SNMP v2/v3.Server Port: Change the server port for a service if needed; however you have to use the same port touse that service for remote management.Get Community: Specify the password for the incoming Get and GetNext requests from themanagement station. By default, it is set to public and allows all requests.Set Community: Specify the password for the incoming Set requests from the m anagement station.By default, it is set to private.
