Zanussi ZCE 650 Instruction Booklet

27Something not workingSYMPTOM The cooker does not operate. The ceramic hob is not giving satisfactory results. The oven does not come on. The oven light does not come on. It takes too long to finish the dishes, or they arecooked too fast. Steam and condensation settle on the food and theoven cavity. The oven fan is noisy. The display shows "12.00".SOLUTION Check that the unit is plugged in and the electricalsupply is switched on. Check that the RCCB has not tripped (if fitted). Check the mains fuse has not blown. Check the correct control knob has been turned. Check the cooking pan is the correct size for thecooking zone. Check the cooking pan has a flat base. Check the setting is correct for the type of cooking. Check that a cooking function has been selected. Check the oven is in manual operation. Check that the socket switch or the switch from themains supply to the cooker are ON. Select a function with the oven function controlknob. Check the light bulb, and replace it if necessary(see "Oven Lamp replacement"). The temperature may need adjusting. Refer to the contents of this booklet, especially tothe chapter “Using the Oven”. Leave dishes inside the oven no longer than 15-20minutes after the cooking is completed. Check that shelves and bakeware are not vibratingin contact with the oven back panel. Set the time of day (see chapter "How to set thetime of day").If after all these checks, the cooker still does not work, contact your local Electrolux Service Force Centre.If the appliance is not working correctly, please carry out the following checks, before contacting your local ServiceCentre.IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,a charge will be made even if the appliance is under guarantee.