Cleaning The Door GlassInstalling the cookerLocationZ C G 7 9 0 0 X33For your safetyThis cooker must be installed and serviced by a competentperson as stated in the Gas Safety (Installation & Use)regulations current editions and the IEE Wiring Regulations.It is important that the cooker is suitable for your gassupply. Your installer should check the data badge.Make sure that a stability bracket is fitted.For your safetyThe use of a gas cooking appliance results in the productionof heat and moisture in the room in which it is installed.Ensure that the kitchen is well ventilated: keep naturalventilation holes open or install a mechanical ventilationdevice (mechanical extractor hood).Prolonged intensive use of the appliance may call foradditional ventilation, for example opening of a window, ormore effective ventilation, for example increasing the level ofmechanical ventilation where present.For further details see page 43.InstallationTo prevent damaging or weakening the door glass panels avoidthe use of the following:Household detergents and bleachesImpregnated pads unsuitable for non-stick saucepansBrillo/Ajax pads or steel wool padsChemical oven pads or aerosolsRust removersBath/Sink stain removersIf the door glass panel becomes chipped or has deep scratchesthe glass will be weakened and must be replaced to prevent thepossibility of the panel shattering. Please contact your localService Centre who will be pleased to advise further.