Zanussi ZCG43250BA User Manual

BURNER OVERVIEWABCGF EDA. Burner capB. Burner crownC. SlotsD. ThermocoupleE. Ignition candleF. Burner bodyG. Hole for the ignition candleREPLACING BURNER PARTS1. Put carefully the burner crown on the burnerbody. Let the crown fall freely onto the body.Do not use force.Make sure that the hole in the crown is abovethe ignition candle.Make sure that the location pegs are in theslots in the burner body.Make sure that you can move the crown a smalldistance from side to side.2. Put the burner cap centrally on top of thecrown.Make sure that the cap is correctly installed,with the enamel side up and you can move thecap from side to side and front to back.3. Light the burner.If the burner does not ignite, adjust the crown andcap again.TURNING THE BURNER OFFTo put the flame out, turn the knob to the offposition .WARNING! Always turn the flamedown or switch it off before youremove the pans from the burner.LID SAFETY DEVICELid has safety device, which cuts off the gas supplyfor the hob. Closing the lid activates the safetydevice.WARNING! Always use the knob forthe hob to switch off a burner. Do notuse the lid as a cut-off device.HOB - HINTS AND TIPSWARNING! Refer to Safety chapters.COOKWAREWARNING! Do not put unstable ordamaged pots on the burner toprevent spills and injuries.CAUTION! Make sure that pothandles are not above the front edgeof the cooktop.CAUTION! Make sure that the potsare placed centrally on the burner inorder to get the maximum stability anda lower gas consumption.DIAMETERS OF COOKWAREWARNING! Use cookware withdiameters applicable to the size ofburners.12