Zanussi ZCG43250BA User Manual

WARNING! Keep children away whenyou clean the oven at a hightemperature. The oven surfacebecomes very hot and there is a risk ofburns.Spots or discolouration of the catalyticsurface have no effect on catalyticproperties.Before activating the catalytic cleaningremove all the accessories from theoven.The walls with catalytic coating are self-cleaning.They absorb fat which collects on the walls whilethe appliance operates.To support the self-cleaning procedure, heat theempty oven on a regular basis.The oven cavities must be cleaned separately.1. Clean the oven floor with warm water andwashing-up liquid, then dry it.2. Set the maximum temperature and let the ovenoperate for 1 hour.3. When the appliance is cool, clean it with a softand moist sponge.REMOVING THE SHELF SUPPORTSTo clean the oven, remove the shelf supports.1. Pull the front of the shelf support away from theside wall.2. Pull the rear end of the shelf support away fromthe side wall and remove it.21Install the shelf supports in the opposite sequence.CAUTION! Make sure that the longerfixing wire is in the front. The ends ofthe two wires must point to the rear.Incorrect installation can causedamage to the enamel.REMOVING AND CLEANING THE DOORGLASSES - TOP OVENThe door glass in your product can bedifferent in type and shape from theexamples you see in the image. Thenumber of glasses can also bedifferent.1. Open the door.2. Hold the door trim on the top edge of the doorat the two sides and push inwards to releasethe clip seal.1213. Pull the door trim to the front to remove it.4. Remove the glass panels.To install the panels, do the same steps in reverse.REMOVING AND CLEANING THE DOORGLASSES - MAIN OVENThe door glass in your product can bedifferent in type and shape from theexample you see in the image. Thenumber of glasses can also bedifferent.1. Push the door trim at one side to remove it.23