Zanussi ZCM 700 X Instruction Booklet

Zanussi ZCM 700 X Instruction Booklet Manual pdf 28 page image

28REAR WALL 165 mm+Fitting the Stability Bracket(Not supplied)If the cooker has to be installed with a flexible supplypipe, it is necessary that a stability device is fitted.If a stability bracket should be fitted by the installer,these instructions should be read in conjunction withthe leaflet packed with the stability bracket.1. Place the cooker in its intended positionand mark the cooker height.2. Mark 165mm below the cooker height. Thisis the position of the stability bracket.3. Fix a large type of stability bracket (usingtwo of the provided five fixing holes) tothe rear wall (see the picture below).4. Pull the cooker towards the rear wall asshown in the diagram. The stability bracketshould then come into contact with the rearpanel of the cooker (see diagram).Should the stability bracket currently installed notallow the cooker to stand correctly, ask the installerto replace it with the correct type.