Zanussi ZDI 200 User Manual
                                | |
Contents
| 
The wash results are not satisfactoryThe dishes are wet and dull • Rinse aid was not used.• The rinse aid dispenser is empty.There are streaks, milky spots or a bluish coating onglasses and dishes• Decrease rinse aid dosing.Water drops have dries onto glasses and dishes • Increase rinse aid dosing.• The detergent may be the cause. Contact the de-tergent manufacturer’s consumer care line.If after all these checks, the problem persists,contact your local Service Force Centre.Technical dataDimensions Width x Height x Depth 59,6 x 81,8-87,8 x 57,5Electrical connectionVoltage - Overall power - FuseInformation on the electrical connection is given on the rating plate on the inner edge of the dishwasher s door.Water supply pressure Minimum - Maximum(MPa)0,05 - 0,8Capacity place settings 12Max. weight kg 38,5Noise level dB(A) 49Consumption valuesThe consumption values are intended as aguide and depends on the pressure and thetemperature of the water and also by the var-iations of the power supply and the amount ofdishes.Consumption valuesProgramme Programme duration(in minutes)Energy consumption(in kWh)Water (litres)Intensive 70° 80-90 1,6-1,8 22-24Normal 65° 95-105 1,5-1,7 21-2321 |
Related manuals for Zanussi ZDI 200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine