Zanussi ZDS15010WA User Manuals

Contents

CLEANING THE SPRAY ARMSDo not remove the spray arms. If the holes in thespray arms are clogged, remove remaining parts ofsoil with a thin pointed object.EXTERNAL CLEANING• Clean the appliance with a moist soft cloth.• Only use neutral detergents.• Do not use abrasive products, abrasive cleaningpads or solvents.INTERNAL CLEANING• Carefully clean the appliance, including therubber gasket of the door, with a soft dampcloth.• If you regularly use short duration programmes,these can leave deposits of grease andlimescale inside the appliance. To prevent this,we recommend to run long durationprogrammes at least 2 times per month.• To maintain the performance of your applianceat its best, we recommend to use monthly aspecific cleaning product for dishwashers.Follow carefully the instructions on thepackaging of the product.TROUBLESHOOTINGIf the appliance does not start or it stops duringoperation. Before you contact an AuthorisedService Centre, check if you can solve the problemby yourself with the help of the information in thetable.WARNING! Repairs not properly donemay result in serious risk to the safetyof the user. Any repairs must beperformed by qualified personnel.With some problems, the display shows analarm code.The majority of problems that can occur canbe solved without the need to contact anAuthorised Service Centre.Problem and alarm code Possible cause and solutionYou cannot activate the appli-ance.• Make sure that the mains plug is connected to the mains sock-et.• Make sure that there is no damaged fuse in the fuse box.The program does not start. • Make sure that the appliance door is closed.• Press Start.• If the delay start is set, cancel the setting or wait for the end ofthe countdown.• The appliance has started the procedure to recharge the resininside the water softener. The duration of the procedure is ap-proximately 5 minutes.The appliance does not fill withwater.The display shows .• Make sure that the water tap is open.• Make sure that the pressure of the water supply is not too low.For this information, contact your local water authority.• Make sure that the water tap is not clogged.• Make sure that the filter in the inlet hose is not clogged.• Make sure that the inlet hose has no kinks or bends.13