Zanussi ZDS15010WA User Manuals

Contents

USER MODEPress and hold simultaneously Delay and Start until the indicators , and start toflash.In user mode, the following settings can be changed:• The level of the water softener according to the water hardness.• The activation or the deactivation of the acoustic signal for end of programme.• The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid.These settings are saved until you change them again.ADJUSTING THE WATER SOFTENERWhile the appliance is in user mode:1. Press Program.• The indicators and go off.• The indicator continues to flash.• The display shows the current setting: e.g.= level 5.2. Press Program to change the setting. Eachtime you press the button, the level numberincreases. After level 10 you start again fromlevel 1.3. Press the on/off button to confirm the setting.THE WATER HARDNESS TABLEGerman degrees(°dH)French degrees(°fH) mmol/l Clarke degrees Water softenerlevel47 -50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83 7.6 - 8.3 53 - 57 937 - 42 65 - 75 6.5 - 7.5 46 - 52 829 - 36 51 - 64 5.1 - 6.4 36 - 45 723 - 28 40 - 50 4.0 - 5.0 28 - 35 619 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1)15 - 18 26 - 32 2.6 - 3.2 18 - 22 411 - 14 19 - 25 1.9 - 2.5 13 - 17 34 - 10 7 - 18 0.7 - 1.8 5 - 12 2<4 <7 <0.7 < 5 1 2)1) Factory setting2) Do not use salt at this level.7