Zanussi ZDTL 200 User Manual

Contents

Indicator lightsSalt Illuminates when the special salt has run out.Is never illuminated while a washing programme isrunning.Audible signalsAudible signals have been introduced to helpindicate which operations the dishwasher isperforming.– end of the washing programme,– malfunction of the applianceFactory setting: audible signals activated.It is possible to deactivate the audible signals,using the Programme selection/Cancel but-ton.Deactivation/activation of the audible sig-nals1. Press the On/Off button. The appliancemust be in setting mode.2. Press and hold Programme selection/Cancel button until programme light Aflashes and programme light B illuminateswith fixed light.3. Press Programme selection/Cancel but-ton again: programme light A becomesfixed and programme light B starts flashing.4. After a few seconds:– programme light A turns off– programme light B goes on flashing– End of programme light illuminateswith fixed light, indicating that the audi-ble signals are active.5. To deactivate the audible signals pressagain the Programme selection/Cancelbutton: the End of programme light turnsoff indicating that the audible signals havebeen deactivated.6. To memorise the operation, switch off thedishwasher.7. To activate again the audible signals, sim-ply follow the above operations until theEnd of programme indicator light illumi-nates.Washing programmesProgramme Degree of soil Type of load Programme descriptionIntensive 70° Heavy soil Crockery, cutlery, potsand pansPrewashMain wash2 intermediate rinsesFinal rinseDrying7