IMPORTANT!If the drying results are not satisfactory we rec-ommend that you:1. Fill up the rinse aid dispenser with rinse aid.2. Set the rinse aid dosage to position 2.If you decide in future to use separated deter-gents, we advise that you:– Fill up the salt and rinse aid container.– Adjust the water hardness setting to thehighest level and perform 1 normal washingprogramme without loading any dishes.– Adjust the water hardness setting accordingto the hardness of the water in your area.– Adjust the rinse aid dosageSet the water softenerThe dishwasher is equipped with a watersoftener designed to remove minerals and saltsfrom the water supply, which would have a det-rimental or adverse effect on the operation ofthe appliance.The higher the content of these minerals andsalts, the harder your water is. Water hardnessis measured in equivalent scales, German de-grees (°dH), French degrees (°TH) and mmol/l (millimol per litre - international unit for thehardness of water).The softener should be adjusted according tothe hardness of the water in your area. Yourlocal Water Authority can advise you on thehardness of the water in your area.The water softener must be set in both ways:manually and electronically.Water hardness Adjusting the water hardnesssettingUse of salt°dH °TH mmol/l manually electronically51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes37 - 42 65 - 75 6,51 - 7,5 2 level 8 yes29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes15 - 18 26 - 32 2,61 - 3,2 1 level 4 yes11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes4 - 10 7 - 18 0,71 - 1,8 1 level 2 yes< 4 < 7 < 0,7 1 level 1 no9