Zanussi ZFE 74 W Instruction Booklet

Contents

Zanussi ZFE 74 W Instruction Booklet Manual pdf 16 page image

16Door reversalBefore carrying out the operations described below,pull out the mains plug from the wall socket.To carry out this reversal go through the followingsteps:1. Gently lay the appliance on its back with the topheld away from the floor by 5-8 cm (2-3 inches) ofpacking.2. Remove the bottom door hinge (5).3. Remove the door (4) by opening it and pulling itgently downwards to remove it from the top hingepin (2).4. Unscrew the top hinge pin (2) from the top hinge (1)and replace it in the opposite hole on the left handside.5. Unscrew the foot at the base (6) of the applianceand refit it on the opposite side.6. Refit the door and the bottom hinge to the left handside.When positioning the bottom hinge blade on thereverse side, the securing screws will require adegree of exersion when fitting.It is therefore advisable to lubricate the screw tipsbefore starting this operation.ImportantAfter completion of the door reversal operation,verify that the door gasket is sealing onto thecabinet.If the ambient temperature is cold (i.e. inWinter), the gasket may not fit perfectly to thecabinet. In that case, wait for the natural fittingof the gasket or accelerate this process byheating up the part involved with a normalhairdryer on a low setting.