Zanussi ZGL642T User Manual

Contents

Problem Possible cause Remedy• Burner cap and crown areplaced uneven• Make sure that the burner capand crown are in correct posi-tions.The flame is blow out immediatelyafter ignition• Thermocouple is not heatedsufficient• After lightning the flame, keepthe knob pushed for approxi-mately 5 seconds.The gas ring burns unevenly • Burner crown is blocked withfood residues• Make sure that the injector isnot blocked and the burnercrown is clear of food particles.If there is a fault, first try to find a solution to theproblem yourself. If you cannot find a solution tothe problem yourself, speak your dealer or thelocal Service Force Centre.If you operated the appliance incorrectly,or the installation was not carried out by aregistered engineer, the visit from the customerservice technician or dealer may not take placefree of charge, even during the warranty period.These data are necessary to help youquickly and correctly. These data areavailable on the supplied rating plate.• Model description .................• Product number (PNC) .................• Serial Number (S.N.) .................Use the original spare parts only. They areavailable at Service Force Centre and approvedspare parts shops.Labels supplied with the accessories bagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO.SER.NO.03 ITMADE IN ITALYTYPE230V-50HzIP2000491 2 31 Stick it on Guarantee Card and send thispart2 Stick it on Guarantee Card and keep thispart3 Stick it on instruction booklet8 www.zanussi.com