Zanussi ZKT 650 D Installation And Operating Instructions Manual

Also see for ZKT 650 D: Instruction book

17Displaying the remaining cookingtimeIf you select a cooking zone which is in timer mode,the cooking time still remaining appears in the timerdisplay window.Using the timer to measure shortperiods of time (“Minute Minder”).1 Important! None of the cooking zones shouldbe set with the Timer!1. Touch the "On/Off" sensor field for around twoseconds.The digital display _ flashes.2. Touch the TIMER sensor field to activate the Ti-mer function.3. Using the or sensor fields, set the desiredlength of time (for example, 20 minutes).The Timer begins to run after a few seconds, and in-dicates the time remaining.When the set time has elapsed, an audible signal issounded.4. Touch the TIMER sensor field, to switch off thesignal.Ending the timer function prema-turelyThere are two ways of switching off the timer early:Switching off the cooking zone and timersimultaneously1. Select the desired cooking zone using the cookingzone buttons.2. Touch the and buttons simultaneously: Thecooking zone and timer will switch off.Switching off the timer - leaving thecooking zone active1. Select the desired cooking zone using the cookingzone buttons.2. Touch the “Timer” button again.3. Touch the and buttons simultaneously:– Only the timer will switch off.– The cooking zone will stay on.