Problem Possible cause RemedyThe oven does not heat up. Thedisplay shows Demo.The demo mode is activated. 1. Deactivate the appliance.2. Press and hold the button +.3. When an acoustic signalsounds, turn the knob for theoven functions to the firstfunction. Demo flashes in thedisplay.4. Turn the knob for the ovenfunctions to the off position.5. Release the button +.6. Turn the knob for the temper-ature clockwise three times.The acoustic signal soundsthree times. The demo modeis deactivated.The display shows an error codethat is not on this list.There is an electronic fault. 1. Deactivate the appliance withthe house fuse or the safetyswitch in the fuse box and ac-tivate it again.2. If the display shows the errorcode again, contact the serv-ice centre.Steam and condensation collecton the food and in the oven.You left the dish in the oven fortoo long.Do not keep the dishes in theoven for longer than 15 - 20 mi-nutes after the cooking ends.If you cannot find a solution to the problemyourself, contact your dealer or the service cen-tre.The necessary data for the service centre is onthe rating plate. The rating plate is on the frontframe of the appliance cavity.We recommend that you write the data here:Model (MOD.) .........................................Product number (PNC) .........................................Serial number (S.N.) .........................................InstallationWarning! Refer to the Safety chapters.20 www.zanussi.com