• Do not use a steam cleaner to clean the appliance.• Before maintenance cut the power supply.• Do not use harsh abrasive cleaners or sharp metal scrapers toclean the glass door since they can scratch the surface, whichmay result in shattering of the glass.• Excess spillage must be removed before the pyrolytic cleaning.Remove all parts from the oven.• To remove the shelf supports first pull the front of the shelf sup-port and then the rear end away from the side walls. Install theshelf supports in the opposite sequence.Safety instructionsInstallationWarning! Only a qualified person mustinstall this appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Obey the installation instruction suppliedwith the appliance.• Always be careful when you move the appli-ance because it is heavy. Always wear safetygloves.• Do not pull the appliance by the handle.• Keep the minimum distance from the otherappliances and units.• Make sure that the appliance is installed be-low and adjacent safe structures.• The sides of the appliance must stay adja-cent to appliances or to units with the sameheight.Electrical connectionWarning! Risk of fire and electrical shock.• All electrical connections should be made bya qualified electrician.• The appliance must be earthed.• Make sure that the electrical information onthe rating plate agrees with the power sup-ply. If not, contact an electrician.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and exten-sion cables.• Make sure not to cause damage to the mainsplug and to the mains cable. Contact theService or an electrician to change a dam-aged mains cable.• Do not let mains cables to come in touchwith the appliance door, specially when thedoor is hot.• The shock protection of live and insulatedparts must be fastened in such a way that itcannot be removed without tools.• Connect the mains plug to the mains socketonly at the end of the installation. Make surethat there is access to the mains plug afterthe installation.• If the mains socket is loose, do not connectthe mains plug.• Do not pull the mains cable to disconnectthe appliance. Always pull the mains plug.• Use only correct isolation devices: line pro-tecting cut-outs, fuses (screw type fuses re-moved from the holder), earth leakage tripsand contactors.• The electrical installation must have an isola-tion device which lets you disconnect the ap-pliance from the mains at all poles. The isola-3www.zanussi.com