What to do if…Warning! Refer to the Safety chapters.Problem Possible cause RemedyThe cooking zones do not operate. Refer to the user manual for the hob.The appliance does not operate. The appliance is not activated. Activate the appliance. Refer tothe chapter "Daily use".The appliance does not operate. The fuse in the fuse box is re-leased.Do a check of the fuse. If the fuseis released more than one time,contact a qualified electrician.The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.Steam and condensation collecton the food and in the oven.You left the dish in the oven fortoo long.Do not keep the dishes in theoven for more than 15 - 20 mi-nutes after the cooking ends.If you cannot find a solution to the problemyourself, contact your dealer or the service cen-tre.The necessary data for the service centre is onthe rating plate. The rating plate is on the frontframe of the appliance cavity.We recommend that you write the data here:Model (MOD.) .........................................Product number (PNC) .........................................Serial number (S.N.) .........................................InstallationWarning! Refer to the Safety chapters.Building UnderWarning! Only a qualified and competentperson must do the installation of theappliance. If you do not contact a qualified orcompetent person, the guarantee becomesinvalid if there is damage.• Before you install the appliance, fit it with theapplicable hob from the table.Type Maximum powerZEV6040 6000 WZEV6041 6400 WZEV6046 7600 WElectrical connection with the hobThe hob connection socket is at the top of theoven cabinet. The hob has connection leads forthe cooking zones and the ground cable. Theleads have plug-in connectors. To connect thehob to the oven, plug the connectors into thecorrect oven sockets. The design of the plugsand sockets prevents incorrect connections.15www.zanussi.com