20 Zanussi 8181497-01/0Installation GBUnpackingUnpack the cabinet and check that it is in goodcondition and free of any transport damage. Notifythe dealer immediately of any damage. Hand thepackaging over for recycling. For more information,contact your local city office or the dealer.Do not allow children to play with thepackaging. The plastic film can causesuffocation.Before installing the cabinetAffix the supplied plastic peaces at the rear of thecabinet.It is possible to have the door decorated with apanel.The panel and the frames for assembling can beordered separately from Your dealer.CleaningWash the inside of the cabinet using lukewarmwater, a mild washing-up detergent and a soft cloth.Installing the cabinetTo otain the best performance from the cabinet, ensure:· the cabinet is placed in a dry, cool place andis not exposed to direct sunlight.· the cabinet is not placed close to a source ofheat, e.g. a cooker or dishwasher.· the room in which the cabinet is placedhas a temperature of +16C to +32C.· the cabinet is level.The cabinet should not leanagainst any wall. If necessary adjust thefeet using the supplied adjustment spanner.· there is good air circulation around the cabinetand that the air channels below and behindthe cabinet are not blocked. The ventilationspace above the cabinet and anygrocery/top cabinet must be at least 200 cm@.The ventilation space can either bea) directly above the cabinet, orb) behind and above the top cabinet. In this case,the space behind the cabinet must be at least50 mm deep.If the cabinet is placed in a corner and the side withthe hinges faces the wall, the distance between thewall and the cabinet must be at least 10 mm to allowthe door to open enough so that the shelves can beremoved.50mma) b)