Zanussi ZZB25602XU User Manual

Contents

Zanussi ZZB25602XU User Manual Manual pdf 3 page image

• Before carrying out any maintenance, disconnect the appliancefrom the power supply.• WARNING: Ensure that the appliance is switched off beforereplacing the lamp to avoid the possibility of electric shock.• Do not use the appliance before installing it in the built-instructure.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metal scrapers toclean the glass door since they can scratch the surface, whichmay result in shattering of the glass.• If the mains power supply cable is damaged, it must bereplaced by the manufacturer, its Authorised Service Centre orsimilarly qualified persons to avoid an electrical hazard.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls. Installthe shelf supports in the opposite sequence.SAFETY INSTRUCTIONSINSTALLATIONWARNING! Only a qualified personmust install this appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Follow the installation instructions supplied withthe appliance.• Always take care when moving the appliance asit is heavy. Always use safety gloves andenclosed footwear.• Do not pull the appliance by the handle.• Keep the minimum distance from otherappliances and units.• Install the appliance in a safe and suitable placethat meets installation requirements.• The appliance is equipped with an electriccooling system. It must be operated with theelectric power supply.ELECTRICAL CONNECTIONWARNING! Risk of fire and electricshock.• All electrical connections should be made by aqualified electrician.• The appliance must be earthed.• Make sure that the parameters on the ratingplate are compatible with the electrical ratingsof the mains power supply.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and extensioncables.• Make sure not to cause damage to the mainsplug and to the mains cable. Should the mainscable need to be replaced, this must be carriedout by our Authorised Service Centre.• Do not let mains cables touch or come near theappliance door or the niche below theappliance, especially when it operates or thedoor is hot.• The shock protection of live and insulated partsmust be fastened in such a way that it cannot beremoved without tools.• Connect the mains plug to the mains socketonly at the end of the installation. Make sure thatthere is access to the mains plug after theinstallation.• If the mains socket is loose, do not connect themains plug.• Do not pull the mains cable to disconnect theappliance. Always pull the mains plug.• Use only correct isolation devices: lineprotecting cut-outs, fuses (screw type fuses3