Series 3 Technician’s Installation and Service Training ManualPerforming a Factory ResetSeries 3 Technician’s Installation and Service Training ManualPerforming a Factory ResetSeries 3 Performing a Factory ResetZAP Series 3Simply LogicalZAP Controls100 Waterloo Blvd. Anglesey Business Park, Littleworth Road, Cannock, Staffordshire, EnglandUK Contact 011-44-154-387-9444 sales@zap-uk.comUSA Contact 931-510-4432 sales@zap-america.comUSA Tech Support 931-510-4432 via telephone or textOnline www.zap-uk.comTo perform a Factory resetDisconnect the power supply for 5 minutes.Restore power supply.Locate the program button. (Figure A)Locate the reset button. (Figure A)Press and hold down the reset button.(Figure A)While holding the reset button down, press andhold down the red program button.(Figure A)Release the reset button only and wait for theacknowledge light to flash once.Then release the program button.After releasing the program button you willreceive 2 confirming flashes of the acknowledgeLED.RESET BUTTONPROGRAM BUTTONACKNOWLEDGE LED(Figure A)72
