Zeiss Colibri 7 Operating Manual

Also see for Colibri 7: Quick reference guide

Zeiss Colibri 7 Operating Manual Manual pdf 19 page image

START-UPColibri 7 Unpacking Colibri 7 ZEISS02/2017 423052-7344-001 193.2 Unpacking Colibri 7The lamp module, the desktop power supply unit and other optional accessories are supplied separatelyin customary packaging.• Remove all parts from the packaging.• Check them for completeness according to the delivery note.3.3 Attaching Colibri 7 to the microscope and connecting itThe lamp module is operated via the reflected light mount of the microscope.In case of microscope systems with laser application, the clamping screw (Fig. 9/4) on thereflected light mount for fastening the lamp module to the microscope is a safety screw andmay only be removed by ZEISS Service (not a customer interface). Otherwise there is a risk ofeye damage upon laser coupling.In case of microscope systems without laserapplications proceed as follows:• Attach dovetail (Fig. 9/1) of the lamp module(Fig. 9/2) to the reflected light mount (Fig. 9/3).• Tighten clamping screw (Fig. 9/4).The lamp module does not require any adjustment.Depending on equipment variation, the Colibri 7can be controlled via the TFT display of themicroscope, the control panel, the LED Trigger Boxor via PC.Fig. 9 Attaching the lamp module to themicroscope