Zeiss Colibri 7 Operating Manual

Also see for Colibri 7: Quick reference guide

Zeiss Colibri 7 Operating Manual Manual pdf 27 page image

OPERATIONColibri 7 Controlling the Colibri 7 solid-state light source ZEISS02/2017 423052-7344-001 274.2.3 Operation with PC via the ZEN 2.3(blue edition) softwareColibri 7 has been mounted on themicroscope, connected via CAN andpowered via the desktop power supplyunit.The microscope and the PC have beenswitched on.The ZEN software (blue edition) hasbeen started.4.2.3.1 Control of Colibri 7 with the"Microscope Control" tool in the"Locate" tab• Click on the Locate tab in the software (seeFig. 16).• Expand the Microscope Control tool byclicking on the expander.• If required, activate the Show All option.• Click on the Colibri 7 icon to open theColibri 7 control menu.After opening, the default mode of thecontrol menu is Continuous.• Switch the LEDs on or off by activating /deactivating the respective checkbox, e.g.(see Fig. 17).• Adjust the brightness for the selected wavelength using the sliders, entry fields or arrowbuttons.• Activate the excitation filter for LED 567 byclicking on the 555 or 590 button at Excitationfilter for LED 567.• Switch all LEDs simultaneously on or off byclicking on Deactivate all LEDs or Activate allLEDs.• Click on Continuous or Gated to select thedesired mode for image acquisition (see alsonext page).Fig. 16 Colibri 7 control via "MicroscopeComponents" toolFig. 17 Control menu for Colibri 7