LSM 510 and LSM 510 METALaser Scanning MicroscopesBrief Operating ManualRelease 3.5July 2005

Starting the System

Setting the microscope

Configuring the beam path and lasers

Scanning an image

Storing an image

Zeiss LSM 510 Brief Operating Manual

Introduction to ZEN – Efficient Navigation

Setting up the microscope

Storing and exporting image data

Switching off the system

LSM 510 Inverted

NOTES ON DEVICE SAFETY

Regulations

Notes on Setting up the Microscope System

Notes on Handling the Computer and Data Media

Notes on Care, Maintenance and Service

Notes on Handling the Laser Components

Warning and Information Labels

LSM 510 - SETUP REQUIREMENTS

LSM with Ar UV Laser

LSM prepared for Two Photon Lasers (NLO)

Power Requirements

Phase 1 (LSM)

Physical Dimensions

Dimension of Shipment Crates

Vibrations

LASOS LGK 7786 P / Power supply 7460 A: 543 nm, 1 mW, Laser Class 3 B

Microscopes

Scanning Module

Laser Module VIS (405, 458, 477, 488, 514, 543, 633 nm)

System Overview LSM 510 META

System Overview LSM 510 META - NLO

Notes on setting up the microscope system

Notes on handling the computer and data media

Notes on care, maintenance and service

Notes on handling the laser components

Warning and information labels

LSM with Ar laser (UV) and two microscopes: 450 x 220 cm

Dimension of shipment crates

Laser Specifications

LASOS LGK 7812 ML-1/LGN 7812: 458, 488, 514 nm, 25 mW, laser power class 3 B

Laser Module VIS

Configuration

Quick Guide

Starting up the system

The software will open to the ocular tab

The Acquisition Tab

In the Imaging Setup window

In the Online Acquisition window

Adjusting PMTs

Z series

The Information tab next to the image

APPENDIX B – Parts of the microscope

APPENDIX C – Configuring the Light Path

LSM 510 META


Contents Table Of Contents Starting the System Setting the microscope Configuring the beam path and lasers Scanning an image Storing an image	LSM 510 and LSM 510 METALaser Scanning MicroscopesBrief Operating ManualRelease 3.5July 2005 Next / 16