07/05 3Starting the SystemSwitching on the LSM system• When set to ON the REMOTE CONTROL switchlabeled System/PC provides power to themicroscope and the computer. This allows touse the microscope and the computer withoutrunning the LSM Software (Fig. 1).• To switch on the system completely put theComponents switch also to ON. Now thecomplete system is ready to be initialized withthe LSM Software.Switching on the HBO 100 mercury lamp• Switch on the HBO 100 mercury lamp via theswitch of the power supply, see operatingmanual of the mercury lamp or microscope.Switching on the Enterprise UV-Ar Laser• If the UV laser is required, switch it on via thetoggle switch (Fig. 2/1) of the power supply.− It will be ready for operation after a fewseconds.Fig. 1 REMOTE CONTROL switchFig. 2 Power supply of UV-Ar laser