Zeiss MultiSEM 505 Instruction Manual

Also see for MultiSEM 505 Series: Instruction manual

mä~ëã~=`äÉ~åÉê=^ÇÇ=çå=Ñçê=jìäíápbj =R=çÑ=OONK=^Äçìí=íÜáë=ã~åì~ä1. About this manualThis instruction manual is considered to be part of the Plasma Cleaner Add On.Read the instructions carefully. Keep the instruction manual nearby the Plasma Cleaner Add Onand hand it over to future owners of the instrument.This instruction manual is designed for users who have been trained by an authorised Carl Zeiss Microscopy expert to operate the workstation, the Plasma Cleaner Add On is built in. Operators of the Plasma Cleaner Add On must not deviate from the instructions provided in thisdocument.IMPORTANTIt is assumed that the operator is already familiar with general functions of the ZEN mSEMSoftware and the operation of the MultiSEM workstation.Reference torelated documentsFor detailed information regarding the MultiSEM workstation and the operating software refer tothe Zeiss MultiSEM Instruction Manual.Safety instructionsThe safety instructions in this manual are classified as follows:DANGERThis safety symbol and signal word indicates an imminently hazardous situation.Disregarding this warning WILL result in death or serious injury.CAUTIONThis safety symbol and signal word indicates a potentially hazardous situation.Disregarding this warning MAY result in minor or moderate injury.CAUTIONThis signal word used without a safety symbol indicates a potentially hazardous situation.Disregarding this warning MAY result in property damage.Moreover you will find the following type of information:IMPORTANTThis symbol and signal word draws your attention to important and usefulinformation.