Zenith H25F36DT Installation And Operating Manual, Warranty

P A G E 4 3206-3489-OSYMPTOMSSnowy picture and unclear sound.Multiple images or ‘ghost shadows.’Interference: Sharp lines acrossthe screen and poor sound.Normal picture but no sound.No picture and unclear sound.No picture and no sound.No color, but the sound is O.K.Picture has a big black boxon it, but the sound is O.K.Remote control doesn’t work.Menu options can’t bechanged or selected.No picture or soundwhen any non-cable sourceis selected.No XDS Display.TroubleshootingSome quick and easy tips to resolving problemsPOSSIBLE SOLUTION(S)• Check the antenna connection or location.• Check the cable input.• Check to see if the TV/VCR button on the VCR has the TV selected.• Check the antenna direction and/or location.• Check the cable input.• Make sure the wire from the antenna to the TV isproperly connected.The following may cause image problems or distortion: Electrical appliances,powerful lights, cars, trucks; computers or portable phones; medical equipment• If possible increase the distance between the Entertainment Machine andthe offending appliance. Or turn one of them off.• Check volume levels.• Make sure the TV sound is not Muted.• Try another channel. The problem may be the broadcast,not the TV.• Are the Audio A/V cables properly installed?• Are the wires for external speakers (if you have external speakers)properly installed?• If the audio mode is set to SAP, that channel may not have a SAP program.• Make sure output channels on all A/V equipment are on the same channel (3 or 4).• Check that all A/V connections are correct and tight.• Is the AC power cord plugged in?• Check that your AC power outlet works. (Test it by plugging in another device ortry another outlet.)• Make sure brightness and audio controls are set properly.• Try another channel. The problem may be with the broadcast.• Check the picture settings in the Video menu.• Try another channel. The problem may be with the broadcast.• The CC (closed caption) option may be in Text mode. Select Caption 1, or OFFin the Captions menu.• Make sure the batteries are fresh and installed properly (see page 10).• Make sure the batteries are fresh and installed properly (see page 10).• Try unplugging the TV power cord for a few minutes, then plugging it back in.• Check to see if the source equipment has been turned on.• Make sure that the connections are secure on the back of the EntertainmentMachine and on the source equipment.• XDS data will only appear if provided by the broadcaster.