Zenith IQB42P97G Installation / Operating Manual | Warranty

Press the MENU button on your remote.Press the ADJUST button to select CommonSettings.Using the SET button, select White Balance.Using the ADJUST button, set the desired WhiteBalance.Press MENU to return to the Video Menu, thenSelect DPMS with the ADJUST button.Pressing ADJUST button moves the selection tothe next item as below.Select Language with the ADJUST button.Pressing the ADJUST button moves the selectionto the next item as below.P A G E 1 9206-3524-OOther Common SettingsVIDEO MENUCOMMON SETTINGSPICTUREPOSITION/SIZESOURCEOTHERSMENU QUITSELECTSET ENTERWHITE BALANCE0MENU RETURNSELECTSET NEXTWHITE BALANCE0MENU RETURNSELECTSET NEXT0 13 2DISPLAY SPEAKER WHITEBALANCEDPMSLANGUAGE12345678Adjustment itemsAn adjustment item is selected each time the SET button is pressed.DPMSDPMS stands for Display Power Management Signaling. It is a function that automatically reduces the amount of power consumed by the monitor.When the power is on, if no signal is input within the set time, the power management function is triggered, the monitor screen is automaticallyswitched off, and the monitor goes on standby.This signal wait time can be set from 1 to 5 minutes in units of one minute. Also, the power management function can be switched off. (The factorysetting is OFF)This display has a five-language on screen menu.ENGLISH-A ———————- American EnglishENGLISH-B ———————- British EnglishDEUTSCH —- ——————- GermanFRANÇAIS ———————— FrenchESPANOL ————————- SpanishIf there is no operation for 60 seconds, the screen display goes off.