Zenith IQB42P97G Installation / Operating Manual | Warranty

P A G E 2 9206-3524-OComputer CompatibilityThe Plasma Monitor is set at the factory with adjustment values for 11 types of signals. (See the table below.) When anyofthese signals is input, it is automatically discriminated. For these signals, the desired screen can be adjusted according tothe instructions on adjusting the screen.The Plasma Monitor can also store settings for five types of signals in addition to those set at the factory, as shown in thetable below. Input the signals whose settings are to be stored into memory and adjust for the desired screen following theinstructions on adjusting the screen. Release the adjustment button to automatically store the level into memory. Afteradjustment, when the same signals are input, they are displayed with the setting levels last stored into memory.Mode Display Horizontal frequency Vertical frequency Supported signalnumber (dots x lines) (kHz) (Hz)1 852 x 480 31.72 59.97 Note: When dedicatedgraphics board used2 640 x 480 31.47 59.94 VGA3 640 x 480 37.86 72.81 VGA 72 Hz4 640 x 480 37.50 75.00 VGA 75 Hz5 720 x 400 31.47 70.09 VGA 400 lines640 x 480 34.97 66.61 MAC 13RGB (1)6640 x 480 35.00 66.67 MAC 13RGB (2)7 640 x 400 24.83 56.42 PC98 24kH8 640 x 400 31.50 70.15 PC98 31 kHz9 800 x 600 35.16 56.25 SVGA 56 Hz Note210 640 x 480 15.73 59.94 60 fields11 640 x 480 15.63 50.00 50 fields121314 15.63 to 60.00 50.00 to 75.00 User settings1516Note 1: The dedicated graphics board is an optional product.2: The 800 x 600 mode is compressed display through compression interpolation. Also, thescreen display is also compressed for display.The mode numbers indicate the SIGNAL INFORMATION modes set for the RGB mode and inputsource.

/ 32

Related manuals for Zenith IQB42P97G