Zenith IQB64W10W Operating Manual

Also see for IQB64W10W: Operating guide

P A G E 5 5206-3533-OMulti-Commands Memory ButtonsPress the DEVICE button and MUTE button, simultaneously. Note:“SET” will appear in the LCD.Press one of the memory buttons that you would like to designatefor multi-command or favorite channel operation. Note “M____ (1—4)” will appear in the LCD. The memory button is now ready to beset up.Press up to six commands that you would like to store in the memo-ry button. Note: Each successive selection will appear as 1-6 in theLCD.Press the Channel UP button to store your selection. Note:SAVE will flash twice and the device mode will appear in the LCD.Please repeat the above steps for the remaining memory buttons.Memory button ANTENNA in the SAT mode can be set up to do thefollowing functions: to turn on the Satellite receiver, select channel#18 on the satellite receiver, and then turn on the TV.Press the SAT and MUTE buttons, simultaneously. Note: “SET” Willappear in the LCD.Press memory button ANTENNA. Note: “M____1” will appear in theLCD.Press the POWER button (on the remote) to turn on the Satellitereceiver. Note: “M____1 1” will appear in the LCD.Press the #1 button to select the first digit of channel #18. Note:“M____1 2” will appear in the LCD.Press the #8 button to select the second digit of channel #18. Note:“M____1 3” will appear in the LCD.Press the TV DEVICE button to select the TV DEVICE mode. Note:“M____1 4” will appear in the LCD.Press the POWER button (on the remote) to turn on the TV. Note:“M____1 5” will appear in the LCD.Press the Channel UP button to store the above commands. Note:“SAVE” will flash and the current Device mode will appear.Now, anytime the memory button ANTENNA is pressed while theremote control is in the SAT mode, the commands to turn on theSatellite receiver, select the Satellite channel #18 and turn on theTV, will be sent out by the remote control.Note: Any previously stored multi-commands on a memory buttonwill be erased when new multi-commands are stored to that samememory button.11 2 34 5 67 8 90record pause chapter chapterplaystoprewind fast fwdmenu enterquit ratiosurfflashbkpicturepowermuteguide vcr + infovideo dvdclearvcr cable audio auxtv satvol chpg uppg dwnantenna dbs123454Memory buttons (antenna, video, DVD and DBS) can be set up to store up to six commands with one button push. Any functions, in anydevice mode (except Channel up and Channel down), can be stored in any one of the four memory buttons. This will enable you, for example,to turn on the TV and Satellite receiver and select a preassigned satellite channel with only a one button push.2Example1234