Zenith SENTRY 2 Operating Manual & Warranty

Also see for Sentry 2 Series: Operation guide & warranty Operating guide & warranty Operating guide & warranty Operating guide & warranty Operating guide & warranty

Contents

SETUP MENUFAV. (Favorite) CHANNELSPurposeLets you add channels to and remove channels from the ac-tive channels found when using the AUTO SEARCH op-tion. In this way you can customize the channels that areaccessed through CHANNEL (CH) Up/Down.FAV. CHANNELS is an optional feature. You do not haveto activate this feature in order to use your TV.NOTE: AUX channel cannot be removed.Before Using FAV. CHANNELSUse the AUTO SEARCH feature, if not previously usedwhen you first installed the TV,To Add a Channel to Scan Sequence1. FAV. CHANNELS display should be shown on theTV if you followed the "Basic Menu Operation"given in the "On-Screen Menus" section.AUTO SEARCH-- > FAV. CHANNELSBAND SELECTAFC MODETIME SETFAV. CHANNELSCH 2SAVEDPRESS ADJUSTKEY TO CHANGESelecting Fav. Channels Fay. Channels Display2. Using CHANNEL (CH) Up/Down go to the nearestchannel ABOVE the channel you wish to add.3, Press SELECT to go down to the channel you wishto add.4. Add channel by pressing ADJUST (ADJ)Left/Right until the display shows SAVED.5. Press ENTER (ENT) to return to normal TV viewing.To Remove a Channel from Scan Sequeace1. FAV. CHANNELS display should be shown on theTV if you followed the "Basic Menu Operation"given in the "On-Screen Menus" section.2. Using CHANNEL, (CH) Up/Down go to the channelyou wish to remove.3. Remove channel by pressing ADJUST (ADJ)Left/Right until the display shows SKIPPED.4. Press ENTER (El_gI") to return to normal TV viewing.When Some Channels Can Not Be TunedIf you have some difficulty tuning some channels, you mayhave to manually set the B,M'4D SELECI' option. If you havethe corrtu:t band, but ark: still having difficulty finding a chan-nel you blow to be active, ,,_etthe AFC MODE to SEARCH.BAND SELECTPurposeAllows for setting the TV tuner to match your antenna orcable-TV system.ffyou are having difficultytuning channels, the BAND SELECTmay ha_: to be set manually to match your viewing needs.Before Using BAND SELECTConnect and turn ON all external equipment, such as cable-TV deogder, VCR, etc. Before using BAND SELECT, useAUTO SEARCH if not previously used.NOTE." BAND SELECT is not displayed while AUX chan-nel is being used.To Use BAND SELECT1. BAND SELECT display should be shown on the TVif you followed the "Basic Menu Operation" givenin the "On-Screen Menus" section.2. Press ADJUST (ADJ) Left/Right to select thedesired tuning band, as follows:f -_ fAUTO SEARCHFAV. CHANNELS- > BAND SELECTAFC MODETIME SETSelecting Band Select2597-0BAND SELECTBROADCASTPRESS ADJUSTKEY TO CIIANGEBand Select Display• BROADCAST is used for standard over-the-airbroadcasts.• ('able - CATV :Lsused for most standard cable-TV(CATV) systems.• (;able - HRC is used for cable-TV systems that usettRC (Harmotfieally Related Carrier).• Cable - ICC i_ used for cable-TV systems using ICC(Incremental Coherent Carrier).Available Channels per BandThe chmmels that are av:dlable in the broadcast and cabletuning bands are shown below:BROADCAST BandVHF 2 to 13 UHF 14 to 6,9** Channels above 69 are not selectable.CATV, HRC and ICC Bands00, 0, 1 to 120"*** Channels above 120 are not selectable.When Some Channels Are Not ClearIf some channels are not clear, change the AFC MODE.You may have to try different BAND SELECT and AFCMODE settings until you get a clear picture, channel-to-channel. Refer to the AFC MODE option for details.7--2