Zenith SENTRY 2 SL2753S Operating Manual & Warranty

Also see for SENTRY 2 SL2518RK: Operating guide & warranty

Contents

THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWER h,Plug your TV into an maswitched AC power source. ][[The switched AC oudets found on some video equipmentwill not continue suppl_hng power to the TV once the equip-ment is turned off. If the power to the, TV is interrupted,you will have to set the clock in the TV to the current time. Do not plug TV into switched outlet on cable-'rv decoderDo not plug TV into _wil_:hed outlet on a VCRSTEP 2. TURN TV ONTurn the TV on by pressing OFF-ON.STEP 3. USE AUTO CH. (Channel) SEARCHWhen your TV is first powered up you will see the AUTOCH. SEARCH reminder display. AUTO CH. SEARCHfinds all available channels and stores them in memory foraccess by CHANNEL (CH) Up/Down. To activate AUTOCH. SEARCH, press ADJUST (ADJ) Left/Right. Whenthe search is complete, you can watch the TV program ofyour choice.NOTES:1. The AUTO CH. SEARCH reminder display ap-pears each time you turn on your TV until it hasbeen used at least once.2. Antenna or cable mus_t b_: connected to TV beforeyou use AUTO CH. SEARCH.SETUP MENU->"AUTO CH. SEARCHCH. ADD/DELTUNING BANDAUTO RNE TONECLOCK SETCAP_ONSCH. BACKGROUNDSTARTAuto Ch. Search Reminder DisplayDETERMINING TUNING BAND TUNING BAND ISCH f--'] IS FOUNDDetermining While Searching forTuning Band Active Channels---4PAUTO Ot. SEARCH HAS ODMPLEI'F_q'X/NING BAND ISr_ CHANNELS FOUND\CH2STEREOWhen Search is When Returning toComplete Channel/Audio DisplaySTEP 4. USE OTHER OPTIONSYou may want to consider using the following options:• Program the cha_mels accessed by using CHANNEL(CH) Up/Down. Pefer to CH. ADD/DEL option of the"Setup Menu" section of this operating guide for details.• Set the clock in the TV. Refer to the CLOCK SET optionof the "Setup Menu" secticn of this operating guide fordetails.2s89-o 2 -- 1