Zenith SENTRY 2 SLS8549Y5 Operating Manual & Warranty

Contents

ON-SCREEN MENUSBASIC MENU OPERATIONSSELECT_MENUADJUSTLeff/Righf/m_u _ QFT_[] [] []i@[] ''==I--OFF/ON_ENTERTypical Remote Control1. To See a Menu or Change MenusPress MENU repeatedly until the desired menu isshown. Example shows choosing the SETUP Menu.. To Access an Option/Feature for AdjustmentPress ADJUST (ADJ) Left/Right to access theselected option/feature to see its submenu or statusdisplay. Follow the instructions s]aown in the dis-play. In most cases, you simply press ADJUST(ADJ) Left/Right a second time 1Loadjust the ac-cessed option/feature. You still see the status of theitem change in the di_;play.NOTE:: Do not change channels during menuoperations unless instructed to do so in the proce-dures given in this operating guide.T{ME SETPRESS NUMBERSOR. ADJUST KEYSTime Set Display4. To Access a Different Main MenuPress MENU repeatedly until the desired menu isshown.5. To Return to Normal ViewingPress ENTER (ENT) or wait a few seconds and theTV will return automatically to normal operation.- > ALrFO SEARCHFAV. CHANNELSBAND SELECTAFC MODETIME SETJChoosing Setup Menu2. To Select an Option/Feature on a MenuPress SELECT (SEL) repeatedly until the desiredoption/feature is highlighted. Example showsselecting TIME SET.AUTO SEARCHFAV. CHANNELSBAND SELECTAFC MODE-- > TIME SETService Menus: In addition to the menus shown above,there are menus for factory and field serJicing. Servicemenus are not intended for use by the ovmer.If you inadvertently aco:ss a service menu, press ENTER(ENT) to return immedialely to normal 'IV viewing.JSelecting Time Set2597-o 6 -- 2