Zenith SENTRY 2 SLS8549Y5 Operating Manual & Warranty

Contents

SETUP MENUAFC MODEPurposeLets your TV compensate for variations in broadcast andcable-TV frequencies.If you are having difficulty tuning channels, the AFCMODE may have to be set manually to match your viewingneeds.Before Using AFC ModeConnect and turn ON all external equipment, such as cable-TV decoder, VCR, etc.NOTE: AFC MODE is not displayed while AUX channelis being used.fAUTO SEARCHFAV. CHANNELSBAND SELECT- > AFC MODET/ME SETx..Selecting AFC ModefAFC MODEFIXEDPRESS ADJUSTKEY TO CHANGE"x.AFC Mode DisplayTo Use AFC MODE1. AFC MODE display should be shown .on the TV ifyou followed the "Basic Menu Operation" given inthe "On-Screen Menu:¢' section.2. Press tkDJUST (ADI) Left/Right to select thedesired mode of operation, as follows:• FIXED is used to receive "over-the-air" TV stations,and with many cable TV systems.• SEARCH is used o_alywhen the TV must search tofred the frequency being received, such as when usedwith, certain VCRs and video game modulators.When Some Channels Are Not ClearIf some channels are not ,'.lear,change the BANDSELECT. Y'ou may have to try different AFC MODE andBAND SELECT settings until you get a consi_;tently clearpicture, channel-to-channel. Refer to the BAND SELECToption for details.TIME SETPurposeSets the clock in the TV to the correct time.After the time has been set, the current time will appear onthe Channel/Time display whenever the TV is turned on,the channel is changed, or ENTER (ENT) is pressed.Power Failure Note: The time will have to be reset if powerto the TV is interrupted.AUTO SEARCHFAV, CHANNELSBAND SELECtAFC MODE- > TIME SETSelecting Time SetTIME SETPRESS NUMBERSOR ADJUST KEYSTime Set DisplayTo Use TIME SET from Remote Control1. TIME SET display should be shown on the TV if youfollowed the "Basic Menu Operalfion" given in the"On-Screen Menu,?' section.2. Use Ihe numbered buttons on the remote control toenter the current time. Press ENTER (ENT) to startthe clock.For example, to set the clock to 6:30:, press 6, then3, then 0; and the, n press ENTER (ENT). If youenter an invalid time, such as 14:35 or 2:80, the timewill d_sappear and you can enter another time.To Use TIME SET from Control Panel1. TIME SET display should be shown on the TV if youfollowed the "Bas!ic Menu Operation" given in the"On-Screen Menus" section.2. Use ADJUST (ADJ) Left/Right to set the time, andthen press ENTER (ENT) to start the clock.2597_o 7 -- 3