Zenith SENTRY 2 SLS8549Y5 Operating Manual & Warranty

Contents

SETUP MENUI> AUTO SEARCHFAV. CHANNELS IBAND SELECT |AFC MODE |TIME SETI {AUTO SEARCH CH2| PRESS ADJUST SAVED_____ TO START PRESS ADJUSr_ KEY TO CHANGEAuto Search Display Fay. Channels DisplayI BANDSELECr 1BROADCASTPRESS ADJUSTKEY TO CHANGEBand Select Displayl ____w_PRESS AE)JLIST { PRES,S NUMBERSKEY TO CI-LANGE } OR ADJUST KEYSAFC Mode Display Time Set DisplayAUTO SEARCHPurposeFinds all available channels and stores them in memory foraccess by CHANNEL (CH) Up/Down.Use AUTO SEARCH only when you first install your TV,or when you permanently change the connections to theTV. For example, when you replace the antenna with acable-TV system.Prograramed channels are stored in protected memory, andare not affected by a power outage.Before Using AUTO SEARCHConnect and turn ON all external equipment, such as cableTV decoder, VCR, etc.-- > ALr]70 SEARCHFACvL CHANNELSBAND SELECTAFC MODETIME SETAUTO SEARCHPRESS ADJUSTKEY TO START"Selecting Auto Searchf --.Auto Search Display/-ALrFOSEARCHSEARCHING....CH 2To Use AUTO SEARCH1. AUTO SEARCH display should be shown on theTV if you followed the "Basic Menu Operation"given in the "On-Screen Menus" sectiion.2. Press ADJUST (ADJ) Left/Right to start theAUTO SEARCH, the status of the se.arch is shownin the display. When Lhe search is complete, you canwatch the TV program of your choice.When Some Channels Are Not FoundAUTO SEARCH finds only active channels ;andstoresthem in the Favorite Channel memory. You can add chan-nels to those stored in memory by using the FAV.(Favorite) CHANNELS option.If you have difficulty tuning some channels, you may have tomanually change the BA3qD SELECT and AFC MODE.Refer to respective option for details.When Only AUX Chamae] is FoundYou may have used Auro SEARCH w_ithout having a sig-nal source', (antenna, cable-TV, etc...) coanected to the TV.In which case, no channels, are stored in Favorite Channelmemory, and the TV operates only on the AUX channel.To resolw: this conditio:a, connect a signal source, turn sig-nal source ON, if needed, and use AUTO SEARCH.NOTE: AUX (Auxiliary) channel is ope,rational only onTVs having separate _5deo and audio inputs for VCR opera-tions.jWhile Searching forActive Channels2597-OWhen Search isComplete7-1