Zenith SENTRY 2 SLS9550S Operating Manual & Warranty

Contents

SETUP MENUTUNING BANDPurposeAllows for setting the TV tuner to match your antenna orcable-TV system.If you are having difficulty tuning channels, the TUNINGBAND may have to be set manually to match your viewingneeds.Before Using TUNING BANDConnect and turn ON all external equipment, such as cable-TV decoder, VCR, etc. Use AUTO CH. SEARCH if notpreviously used.To Use TUNING BAND1. TUNING BAND should be selected if you followedthe "Basic Menu Operation" given in the "On-Screen Menus" section.SETUP MENUAUTO CH. SEAI_CHCH. ADD/DELCH. LABELS•-_ TUNING BANDAUTO RNE TUNECLOCK SETCAPTIONSCH. BACKC-I_OU NDBROADCASTSelecting Tuning Band2. Press ADJUST (ADJ) Left/Right to select thedesired tuning band, as follows:• BROADCAST [s used for standard "over-the-air"broadcasts.• Cable - CATV is used for most standard cable-TV(CATV) systems.• Cable - HRC is used for cable-TV systems that useHRC (Harmonically Related Carrier).• Cable - ICC is used for cable-TV systems using ICC(Incremental Coherent Carrier).Available Channels per BandThe channels that are available in the broadcast and cabletuning bands are shown below:BROADCAST BaudVHF 2 to 13 UHF 14 to 69'* Channels above 69 are not selectable.CATV, HRC and ICC Bands1 to 125"*** Channels above 125 may not be selectable.When Some Channels Are Not ClearIf some channels are not clear, change the AUTO FINETUNE. You may have to tJ3' different TLINING BAND andAUTO FINE TUNE settings until you get a clear picture,channel-to-channel. Refer to the AUTO FINE TUNE op-tion for details.AUTO FINE TUNEPurposeLets your TV compensate for variations in broadcast andcable-TV frequencies.If you are having difficulty tuning channels, the AUTOFINE TUNE may have to be set manually to match yourviewing needs.Before Using AUTO FINE TUNEConnecX and turn ON all external equipment, such as cable-TV decoder, VCR, etc.SETUP MENUAUTO CH. SEARCHCH. ADD/DELCH. LABELSTUNING BAND-_ AUTO RNE TUNECLOCK SETCAPTIONSCH. BACKGROUNDRXEDTo Use AUTO FINE TUNE1. AUTO FINE TUNE', should be selected if you fol-lowed the "Basic Menu Operation" given in the"On-Screen Menus" section.2. Press ADJUST (ADJ) Left/Right to select thedesired mode of operation, as follows:• FIXED is used to :receive "over-the-air" TV stations,and with many cable TV systems.• SEARCH is used only when the TV must search tofind the frequency being received, such as when usedwith certain VCRs and video game oantrollers.When Some Channels Art Not ClearIf some channels are not clear, change the TUNINGBAND. You may have to try different AUTO FINE TUNEand TUNING BAND settings until you get a consistentlyclear picture, channel-to-chalmel. Refer to the TUNINGBAND option tor detai_s.Selecting Auto Fine Tune_9_o 7 -- 3