Zenith SENTRY 2 SLS9550S Operating Manual & Warranty

Contents

THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWERPlug your TV into an unswitched AC power source.The switched AC outlets found on some video equipmentwill not continue supplying power to the TV once the equip-ment is turned off. If the power to the TV is interrupted,you will have to set the clock in the TV to the current time.Do not plug TV into swilx:hed outlet on cable-TV decoderDo not plug "IV into s_vitched outlet on a VCRSTEP 2. TURN "IV ONTurn the TV on by pressing OFF-ON.STEP 3. USE AUTO CH. (Channel) SEARCHWhen your TV is first powered up you will see the AUTOCH. SEARCH reminder display. AUTO CH. SEARCHfinds all available channels and stores them in memory foraccess by CHANNEL (CH) Up/Down.NOTE: If you do not see the AUTO CH. SEARCH displaypress MENU repeatedly until SETUP Menu appears. PressSELECT until AUTO CH. SEARCH option is highlighted.To activate AUTO CH. SEARCH, press ADJUST (ADJ)Left/Right. When the search is complete, you can watch theTV program of your choice. SETUPNOTES:* The AUTO CH. SEARCH reminder display appearseach time you turn on your TV until it has been used atleast once.• Antenna or cable must be connected to TV before you useAUTO CH. SEARCHMENU•._ AUTO CH. SEARCHCH. ADD/DELCH. LABELSTUNING BANDAUTO RNE TUNECLOCK SETC_I]ONSCH. BACKGROUNDSTARTAuto Ch. Search Reminder DisplayDETERMINING TLINING BANDDeterminingTuning BandTUNING BAND ISCH [-----I IS FOUNDWhile Searching forActive Channels\LrI'O CH. SEARCH HAS COMPLETEETUNING BAND IS----]CHANNELS FOUNDWhen Search isCompletefCH 2When Returning toChannel DisplaySTEP 4. USE OTHER OPTIONSYou may want to consider using the following options:• Program the channels accessed by using CHANNEL(CH) Up/Down. Refer to CH. ADD/DEL option of the"Setup Menu" section of this operating guide for details.Set the clock in the TV. Refer to the CLOCK SET optionof the "Setup Menu" section of this operating guide fordetails.2589-0 2 -- 1